Holiday Leftovers from LAUPT

Where Have I Been?

As the lack of recents posts atest to, I have been crazy busy lately. Not only have I been working a ton to finish a large project by year’s end at the office, but the holidays are upon us and we are entertaining out-of-state guests for a few weeks. As if that wasn’t enough, I have also spent all of my spare time learning a unique subject that has always interested me. Soon I will prepare a post on the topic and the byproduct of all my research and learning.

Until then, I was making preparations for the upcoming new year when I came across some images that I like which I had not worked into a post yet. Since I am feasting on, as many of you are I suspect, holiday leftovers (honey-baked ham with all the fixings) I thought I would put together a post with some “photo leftovers” until I finish my major effort previously disclosed.

LAUPT Leftovers

Here is a collection of photos taken in March of 2011 at Los Angeles Union Station or, as I prefer to say, LAUPT (Los Angeles Union Passenger Terminal):

SCAX 860 & AMTK 135 - SCAX 860 (EMD F59PH) and AMTK 135 (GE P42DC) are captured here at Los Angeles Union Passenger Terminal (LAUPT) on March 4, 2011.
[3/4/2011 - River Subdivision] Copyright © 2011 Joe Perry. All rights reserved.

While researching the following sequence of images for caption information, I came across a YouTube video which explained the content photographed below. Here is the video taken by Rin Snuffy:

UP 5606 at LAUPT - Los Angeles Union Passenger Terminal (LAUPT) sees a rare visit from a freight locomotive due to the fact that UP 5606, (GE C44ACTE) was dispatched to resuce a failing, and 8 hours late, Amtrak #11, the Coast Starlight, on March 23, 2011. Also in the photo is AMTK 54 (GE P42DC).
[3/23/2011 - River Subdivision] Copyright © 2011 Joe Perry. All rights reserved.

Faces of LAUPT - The faces of three locomotives from three of the four local railroads serving Los Angeles Union Passenger Terminal (LAUPT) pose at the end of the stub tracks. The rare visit of a freight locomotive to Union Station was the result of the UP 5606, (GE C44ACTE) being dispatched to resuce a failing, and 8 hours late, Amtrak #11, the Coast Starlight, on March 23, 2011. Also in the photo are SCAX 862, (EMD F59PH) and AMTK 54 (GE P42DC).
[3/23/2011 - River Subdivision] Copyright © 2011 Joe Perry. All rights reserved.

“The Hostler”
[3/23/2011 - River Subdivision] Copyright © 2011 Joe Perry. All rights reserved.

On the Calendar

I have been on vacation from work for about one week now and I have a few more days before I must go back. I intend on making some preparations this weekend for a short trip to chase some steel that I have planned for early next week. I was fortunate enough to recieve some cool gadgets from Santa and I am looking forward to “playing” with them during the trip. I will let you folks know about them and what I think of them after I put them to the test.

I will also to continue my studies and work on my “project” as time permits. I hope to have something pretty slick and be able to share it you all soon. Until then, see you trackside chasing steel!

UP 844, a Mountain, a Mob, and Me

As I described in in my previous post, ““UP” for a Chase? 844 Comes to California,” Union Pacific’s famous steam engine, the UP No. 844, is in California and garnering quite the attention in the process. On Saturday, November 19, 2011, the UP 844 lead the Centennial Tour train eastbound from West Colton, California to Yermo, California. The route the train was scheduled to take was over BNSF rails up and over the scenic and challenging Cajon Pass. It was the making of a perfect photo opportunity and I headed out early Saturday morning, almost dutifully, to get in position.

I had settled on a location just south, geographically, from Cajon proper, where the rails round a bend at the curved bridge over Zuni Creek. I found a safe spot to park my rig and made sure that my radios (data and voice) where in working order and then watched the traffic flow as I cranked the heater in the cab of my truck. It was 5:00AM and the outside temperature was 40 degrees. 

The weather was not ideal as there was a low moving into the area and this brought low clouds and fog into Cajon Pass. I actually welcomed the the fog because it would add “atomsphere” to the photos but the lack of direct sunlight would make for less than stellar shots—at least from me.

I took a few test shots of a some passing BNSF intermodals and the westbound Southwest Chief to test out all of the possible spots and settings. As I did this I began to meet other folks that had come to see the train. During my discussion with of them I realized that I did not know which of four possible rails the train would be on. Three of them were side-by-side and didn’t present an issue, but the fourth rail did because it was obscured by a cut at my present location.

In a frantic fit, I posted a question on the Trainorders board to ask if anyone knew the exact route the special would take. Minutes turn into an hour and I began to second guess my prime spot. Ultimately I got a few responses that lead me to decide to move further up the hill, and I am glad I did.

As I drove east along SR 138, towards Summit, I passed one grouping of motorists after another pulled off onto the shoulder at every conceivable wide-spot in the road that might afford a glimpse of the train. It was quite the turnout for sure.

After learning the 844 was delayed leaving West Colton, I took a little extra time to find that “just right” spot. I didn’t want to shoot from some of the more obvious locations, for example at Summit. I eventually settled on Martinez, where the tracks converge from three main tracks to two. I leveled my camper and took my gear up to roof. The additional height was necessary to get me near the height of the grade at this spot.

Eventually the 844 began her assault on the hill and would be passing me within the hour. 

While I waited, and waited, the radio traffic betrayed the fact that there was a need for the 844 to “hold the main” at Martinez while a responder performed some sort of servicing. This was a surprise to both, the BNSF dispatcher and me. It also laid my plans to somewhat waste because the train would not be traveling at track speed as she came by my location. Oh well, so it goes, sometimes, when you chase steel.

Little did I know that it would get worse. Since the train was now scheduled to stop at Martinez, just west of me and out of view around a curve, that gave time for all of the folks, that so desired, the time to catch up with the train and continue the chase. This led to more than usual traffic that came along with the train and soon the area around “my spot” was filled with cars and people all over the scene.

The 844 eventually came into view and it was cool to see, no doubt. I took my shots, best I could because I found myself pausing to take it all in a little too long.

When I looked at my shots later that day at home, I was disheartened to see that many of my shots contained people in them right along the rails and on the right-of-way. Bummer. I could “remove” them in post-processing but, fortunately, my best-friend CJ was also on the hill chasing steel.

CJ gave me copies of his photos and I thought they were spectacular so I asked his permission to use them in this post. Of course he agreed. So, it is with great pleasure, and relief that I present the photographic work of CJ Hokanson of the UP No. 844 pulling the Centennial Tour train over Cajon Pass:

A short movie to set the mood…

---

---

Here are a few of my photos to round out the event:

"UP" for a Chase? 844 Comes to California

A Living Legend Comes to California

Today marks the beginning of the “return-trip” for Union Pacific’s “Living Legend,” No. 844, after participating in what Union Pacific dubbed the Centennial Tour to help New Mexico and Arizona celebrate their one-hundred years of statehood.

UP No. 844 - Photo courtesy of Union Pacific Railroad.

Union Pacific’s No. 844 is the last steam locomotive built for Union Pacific, delivered in 1944, and will travel more than 2,900 miles from its base in Cheyenne, Wyoming during the 32-day, nine-state tour that will honor the rich railroad heritage of the scenic Southwest.

Weighing in at nearly 1,000,000 pounds, the ground literally shakes as she rumbles by at track speed. It is a rare opportunity that shouldn’t be missed—and those folks that reside near the return route from Yuma, Arizona through California, Nevada, Utah, and western Wyoming, should take advantage of this opportunity to see one of America’s great steam engines plowing the rails. The following map shows a high-level view of the route:

Thursday, November 17, 2011

No. 844’s excursion into California begins a mere hour or so from now (7:00 AM PST) as she leaves Yuma, Arizona after a day of rest while on display at the border town. As the following schedule for the day indicates, she is enroute to Bloomington, California—a.k.a. West Colton, where she will be serviced and then tied-up for the evening. She will also receive servicing at Niland, California on her way to Colton and this is a good opportunity to get an extended view of the locomotive standing still. If a steam engine at speed is more your thing then grab a wide spot in the road track side and wait for her to come blowing by:

Friday, November 18, 2011

Residents of Southern California will get the same opportunity to view No. 844 up close and personal as the folks in Yuma, Arizona did because on Friday, November 18, 2011 the No. 844 is slated to be on public display at 10359 Alder Avenue, Bloomington, CA 92316, from 9:00 AM until 5:00 PM:

View Larger Map

Saturday, November 19, 2011

Saturday presents a rare opportunity to watch a steam engine struggle against the grades and curves of the much vaunted Cajon Pass as No. 844 leaves Colton and heads to Yermo, California on BNSF rails over the pass. Traditionally, with events such as a steam train traversing the pass, expect a lot of traffic and sightseers all along the route on Saturday. Cajon Pass is one of the favorite locations for local railfans and the smoke from the engine can be seen for some distance in the pass which will garner the attention of travelers on Interstate 15 as well, which dances with the BNSF and Union Pacific rails throughout the southern section of the pass. (I plan on making this part of the trip—see you out there chasing steel!):

Sunday, November 20, 2011

For me, Sunday offers the crème de’ le’ crème portion of the trip through California—the run north out of Yermo towards Las Vegas, Nevada. This portion of the trip traverses some of the most spectacular scenery of the tour in California. Two areas rich in scenery are Afton Canyon and the Mojave National Preserve surrounding Kelso and Cima: 

NOTE: Afton Canyon is extremely remote and should only be attempted by serious four-wheelers, but the Kelso and Cima areas are easily accessible—just remember they are a long way from services such as food, water, and gas—so make sure to top off everything before you leave Yermo.

UP Cima Subdivision Chase Map and UP Tools

Since most folks rarely get into this remote area of California, I thought that I should provide my “Chase Map” for Union Pacific’s Cima Subdivision to assist you in planning your chase. Simply click on each image below to downlaod:

Union Pacific also offers two methods of tracking the locomotive during excursions such as this one. The first one is the internet-based tracking applet on the UP Steam web site. The other one is the newly released iPhone/iPod Touch/iPad app called UP Steam:

UP Steam app - available for both the iPhone and iPad

UP Steam Locomotive Tracking Map

Be Safe and Enjoy the Experience (My PSA)

Before you head out to enjoy the experience at the location of your choosing be sure to read my post called “The New Rules of Railfanning: Don’t Trespass, Be Alert, Report Issues” as it details some of the challenges and risks of being trackside.

Also, remember that any track is a live track and don’t assume that you can hear a train coming. Many times folks lose their focus when a steam train approaches and they mistaken assume that the railroad knows they are there and have closed other tracks for this steam train. This is not so! Since the railroad is private property the expectation is that you are NOT there. Also remember it takes a good deal of distance to stop a train so just stay off of the tracks—all tracks. A safe trip is a FUN trip!

Don’t Do This!

How NOT to behave around railroad tracks!